Benelli Tre 899K, 2011

Benelli Tre 899K, 2011

Specifications
ENGINE TYPE
In line 3 cylinders, 4-stroke, liquid cooled , 4 valves per cylinder double overhead camshaft, with balancer shaft

DISPLACEMENT 898 c.c.
BORE x STROKE 88 x 49,2 mm
COMPRESSION RATIO 12,5:1
RATED OUTPUT 78 kW (104,6 cv) @ 10000 rpm
MAX. TORQUE 75 Nm (7,65 kgm) @ 5000 rpm

LUBRICATION Wet sump
OIL CAPACITY 4 lt

FUEL SUPPLY Electronic injection with three throttle bodies ø53 mm
EXHAUST SYSTEM With catalytic converter and oxigen sensor

CERTIFICATION Euro 3
CLUTCH Dry clutch with hydraulic command with slipper device
GEARBOX 6 speeds

PRIMARY DRIVE 44/79

RAPPORTI DEL CAMBIO
1° - 14/39
2° - 18/35
3° - 21/32
4° - 23/30
5° - 24/28
6° - 25/27

GEAR RATIO
FINAL DRIVE Chain drive, ratio 16:41

CHASSIS
FRAME Decomposable, front steel trestle, rear alluminium alloy casting
FRONT SUSPENSION Ø50 mm upside-down fork
FRONT SUSPENSION STROKE 150 mm

REAR SUSPENSION
Steel tube trestle swingarm, rear dumper with idraulic adjustment (extension, high and low speed compression) and spring preload assembled with progressive link

REAR SUSPENSION STROKE 144 mm

FRONT BRAKE Twin floating disk ø320 mm with radial 4 piston calipers
REAR BRAKE Singol disk ø240 mm with double piston caliper

FRONT RIM TYPE Alluminium alloy
FRONT RIM DIMENSIONS 17”x3.50” DOT-D

REAR RIM TYPE Alluminium alloy
REAR RIM DIMENSION  17”x6.00” DOT-D

FRONT TYRE 120/70-ZR17
REAR TYRE 180/55-ZR17 (190/50-ZR17)

DIMENSIONS
LENGHT 2153 mm
WIDHT EXCLUDING MIRRORS 850 mm
HEIGHT EXCLUDING MIRRORS 1320 mm
SEAT HEIGHT 840 mm
WHEELBASE 1478 mm
GROUND CLEARANCE 140 mm
TRAIL N.D.

STEERING PIPE ANGLE
UNLADEN WEIGHT 215 kg
ROAD READY WEIGHT 240 kg
PERMITTED TOTAL WEIGHT 440 kg
USABLE TANK VOLUME 22 lt
RESERVE 4 lt