Honda XR650L, 2012

Honda XR650L, 2012

US Specifications
ENGINE

• Engine Type 644cc air-cooled dry-sump single-cylinder four-stroke
• Bore And Stroke 100.0mm x 82.0mm
• Compression Ratio 8.3:1
• Valve Train SOHC; four-valve RFVC
• Induction 42.5mm diaphragm-type CV carburetor
• Ignition Solid-state CD with electronic advance

DRIVE TRAIN
Transmission Five-speed
Final Drive #520 O-ring-sealed chain; 15T/45T

Chassis/Suspension/Brakes

• Front Suspension 43mm air-adjustable leading-axle Showa cartridge fork with 16-position compression-damping adjustability; 11.6-inches of travel
• Rear Suspension Pro-link Showa single-shock with spring-preload, 20-position compression- and 20-position rebound-damping adjustability; 11.0-inches travel
• Front Brake Single disc with twin-piston caliper
• Rear Brake Single disc
• Front Tire 3.00-21
• Rear Tire 4.60-18

Dimensions

• Rake 27.0 degrees
• Trail 102.0mm (4.0 inches)
• Wheelbase 57.3 inches
• Seat Height 37.0 inches
• Curb Weight 346 lbs (*Includes all standard equipment, required fluids and full tank of fuel-ready to ride)
• Fuel Capacity 2.8 gallons, including 0.6-gallon reserve
• Ground Clearance 13.0 inches

Available Colors Red
Model Id XR650L
Emissions Meets current CARB and EPA standards. California version differs slightly due to emissions equipment.

FACTORY WARRANTY INFORMATION
One Year Transferable, unlimited mileage limited warranty; extended coverage available with a Honda Protection Plan

Read More

Can-Am Spyder RT-S, 2012

 

 

Can-Am Spyder RT-S, 2012

USA Specifications
ENGINE

• Manufacturer BRP-RotaxType 998cc Rotax V-twin engine calibrated for touring
• Bore & stroke 3.82 in. x 2.68 in. (97 mm x 68 mm)
• Injection Multi-point EFI system with 2 in. (51 mm) throttle body
• Power 100 hp (71 KW) @ 7500 RPM
• Torque 80 lb.-ft. (108 Nm) @ 5000 RPM
• Transmissions 5-speed manual (SM5) with reverse
• Magneto 650 watts
• Starter Electric
• Battery 12 volts / 21 amps/hour, sealed maintenance-free

CHASSIS

• Frame SST Spyder
• Front suspension Double A-arm with anti-roll bar
• Front suspension travel 5.9 in. (151 mm)
• Rear suspension Swing-arm with pneumatic adjustable preload
• Rear suspension travel 5.7 in. (145 mm)
• Brake type Foot-activated, hydraulic 3-wheel braking system
• Front brakes 4-piston calipers with (250 mm x 6 mm) discs
• Rear brake Single-piston sliding pins caliper with (250 mm x 6 mm) disc
• EBD Electronic Brake Distribution
• Parking brake Electro-mechanical
• Front tires 165 / 65 R14
• Rear tire 225 / 50 R15
• Front wheels 6-spoke Aluminum Metallic Silver 14 x 5 in. (355 mm x 127 mm)
• Rear wheel Aluminum Metallic Silver 15 x 7 in. (381 mm x 178 mm)

SAFETY & SECURITY

• VSS Vehicle Stability System
• SCS Stability Control System
• TCS Traction Control System
• ABS Anti-lock Braking System
• DESS Digitally Encoded Security System
• DPS Dynamic Power Steering

DIMENSIONS

• L x W x H 105 x 61.9 x 58 in. (2,667 x 1,572 x 1,473 mm)
• Wheelbase 67.2 in. (1,708 mm)
• Seat height 30.4 in. (772 mm)
• Ground clearance 4.5 in. (115 mm)
• Dry weight 929 lb. (421 kg)
• Total storage capacity 41 US gal. (155 L)
• Maximum vehicle load 525 lb. (240 kg)
• Fuel capacity 6.6 US gal. (25 L)

FEATURES

• Instrumentation Multi-function color dot-matrix/analog gauge: digital speedometer, tachometer, odometer, trip & hour meters, gear position, temperature, engine lights, electronic fuel gauge, clock
• Lighting 2 halogen headlamps (60W)
• Windshield Touring: electric adjustment
• Wind deflectors 2 driver wind deflectors
• Cruise control Electronic
• Heated grips Heated rider handlebar grips, High/Low/Off
• Touring saddle Ultra comfortable with lumbar support and passenger backrest
• Passenger floorboard Manually adjustable
• Passenger armrests Standard on all Spyder RT models
• RECC Roadster Electronic Command Center
• Power outlet 12V lighter type, in rear cargo area
• Trailer lock Barrel for RT-622 trailer (Trailer optional)

Warranty 2 years
Transmission available SM5 – 5-speed manual with reverse
 Color Pure Magnesium Metallic

Read More

Aprilia RS450, 2012

 

 

 Aprilia RS450, 2012

International Specifications

• Engine type Single-cylinder, two stroke, carburettor, liquid cooled.
• Bore and stroke 39.86 x 40 mm
• Engine capacity 49.9cc
• Compression ratio 11.5 :1
• Ignition Electronic with CDI capacity discharge
• Start up Electric
• Lubrication Automatic mixer
• Gearbox 6 Ratios, 1st 11/34, 2nd 15/30, 3rd 18/27, 4th 20/24, 5th 22/23, 6th 23/22
• Primary drive Gears, 21/78
• Final drive Chain, 11/53
• Clutch Multiplate wet clutch
• Frame Twin spar aluminium frame
• Front suspension 41 mm upside down fork, wheel travel 110 mm
• Rear suspension Asymmetric swingarm with monoshock, wheel travel 130 mm
• Brakes Front: 300 mm stainless steel disc with radial 4 piston calliper
• Rear: 218 mm stainless steel disc and calliper with single 30 mm piston
• Wheel rims In light alloy with 6 split spokes, with sealing profile for tubeless tyres; front: 2.75 x 17"; rear: 3.50 x 17"
• Tyres Front: 100/80 - 17", rear: 130/70 - 17"
• Dimensions Max. Length 1953 mm
• Max width 740 mm
• Max height at top fairing 1,138 mm
• Saddle height 820 mm
• Wheelbase 1,350 mm
• Fuel tank capacity 14.5 litres (including 3.5 litre reserve)
• Emissions compliance Euro 2

The summary of the peculiar characteristics of the Aprilia RS4 50:

• - RS4 50 - 50cc 2 stroke single-cylinder engine, liquid cooled with six speed transmission
• - stiff aluminium perimeter frame derived from racing experience
• - 41 mm upside down fork
• - front brake with 300 mm disc and radial four piston calliper
• - Superbike inspired analogue/digital instrument panel
• - fairings derived directly from the RSV4 for total aesthetic coherence with the SBK bike
• - LED taillight

Read More

BMW C600 Sport, 2012, Scooter

 

 BMW C600 Sport, 2012, Scooter

Specifications/Technical Details
Engine

• Capacity cc 647
• Bore/stroke mm 79/66
• Output kW/hp 44/60 at speed rpm 7500
• Torque Nm 66 at speed rpm 6000
• Type Water-cooled 2-cylinder 4 stroke engine
• Compression/fuel 11.6:1 / regular lead free (95 RON)
• Valve control DOHC (double overhead camshaft), bucket tappets
• Valves per cylinder 4
• Intake/exhaust Ø mm 31.5/27.1
• Throttle valve diameter mm 38
• Fuel injection BMS-E
• Electrical system
• Alternator W 588
• Battery V/Ah 12/12
• Headlights High/low beams: 12 V /55 W halogen
• Rear light LED brake/rear light
• Gearbox power transmission
• Clutch Centrifugal clutch
• Gearbox CVT (continuously variable transmission)
• Primary ratio 1.06
• Rear wheel drive Chain in oil bath
• Ratio 1.688
• Suspension
• Frame type Aluminium bridge frame with aluminium rear frame bolted on
• Front suspension system Upside down fork
• Rear suspension system Cast single swingarm
• spring travel front/rear mm 115/115
• Trail mm 92
• Wheelbase mm 1591
• Steering head angle ° 25.4

Brakes front Hydraulically actuated two-rotor disc brake, 270 mm diameter, double piston floating calliper rear Hydraulically actuated single disc brake, 270 mm diameter, double piston floating calliper, ABS BMW Motorrad ABS (standard)
 

Wheels Cast aluminium wheels

• front 3.50 x 15"
• rear 4.50 x 15"
• Tyres front 120/70 R15
• rear 160/60 R15

Dimensions and weights

• Overall length mm 2155
• Overall width with/without mirrors mm 877/790
• Seat height (without rider) mm 810 (standard)
• DIN unladen weight, road ready kg 249
• Permitted total weight kg 445
• Fuel tank capacity l 16
• Riding data
• Fuel consumption
• 90 km/h l/100 km 4,5
• 100 km/h l/100 km 4.8
• 120 km/h l/100 km 5,6
• Acceleration
• 0-100 km/h s 7.1
• Max speed km/h 175

Read More

Benelli Tre-K 1130 Amazonas, 2012

Benelli Tre-K 1130 Amazonas, 2012

Benelli. 100 years ahead
Quality, innovation, range. Benelli reboots after their 100th year anniversary in 2011 to take on the market with even greater determination. The goals have been stated clearly: maximum product quality, an updated, more polished range, production in Italy but with marketing operations throughout the world. With all this, 2012 is sure to be a banner year with consolidation of the existing production organization in view of the gradual introduction of brand new models that will top off Benelli’s offer and complete the manufacturer’s relaunch started five years ago following the acquisition by QJ.

Quality takes first priority: the enormous task of testing, developing and fine-tuning the entire 2012 range has allowed us to achieve the highest standards on the market and guarantee the Benelli buyer reliability, optimized fuel consumption and meticulous bike construction. And that naturally includes the joy of riding a Benelli, which is the distinctive, essential trait of every motorbike that comes off the assembly line of the Pesaro plant.

Pesaro, Italy: this is where Benelli’s hub lies, in an efficient, modern structure vaunting the highest standards of quality that was maintained as the chief production headquarters. The “Made in Italy” stamp remains an indispensable element for Benelli, which is looking ahead to seize the opportunities offered by the global market, conscious of the fact of its role as a brand leader with a legendary history and confident of its offer of top-end products standing out for their quality, design and sporty allure.

The Benelli motorcycle range for 2012 has been renewed, refined and enriched with new models.

The Features
Tre-K, touring and sport for 2012: the new calibration of the suspensions guarantees maximum comfort in all riding conditions, even with a passenger on board, at the same time enhancing the sporty feel of the Tre-K models. These bikes have also benefited from the increased quality of components and assembly to offer the Benelli enthusiast the best in terms of reliability and just plain fun. What’s more, the renewed colour themes highlight the multi-faceted and dynamic lines of the Tre-K even more than in the past.

Tre-K 1130 Amazonas: the queen of the sporty grand tourers is back with a new take on many of her details, including the mapping of the three cylinders intended to reduce fuel consumption and increase the regularity of fuel injection, and the new suspensions, chosen to improve riding efficiency while lowering the seat. The updated Tre-K 1130 Amazonas will be available at Benelli dealers from March 2012.

Read More