Aprillia = Batman = Benneli = Beta = Bimota = BMW = Buell = Can-Am = Ducati = Ferrari = Gilera = Harley-Davidson = Honda = Husqvarna = Husaberg = Hyosung = Indian = Kawasaki = KTM = Kymco = Lambhorgini = Mondial = Moto-Guzzi = Norton = Peugeot = Piaggio = Polaris = Ridley = ROEHR = Royal = Suzuki = Triumph = Ural = Vespa = Victory = Wyne = Yamaha

Saturday, April 30, 2011

Buell 1125CR, 2009

Buell 1125CR, 2009

 
 
SPECIFICATIONS:
Dimensions
Overall Length6 81.3 in. (2066 mm)
Overall Width8 29.3 in. (744 mm)
Seat Height7 (Standard) 30.5 in. (775 mm)
Ground Clearance6 5.43 in. (138 mm)
Rake7 (steering head) 21.0°
Fork Angle7 21.0°
Lean Angle9:
• Soft Contact, Right - 48°
• Soft Contact, Left - 48°
• Hard Contact, Right - 50°
• Hard Contact, Left - 50°

Trail7 3.3 in (84 mm)
Wheelbase6 54.5 in. (1385 mm)
Tires4 (Pirelli® Diablo® Corsa III):
• Front - 120/70 ZR-17
• Rear - 180/55 ZR-17
Fuel Capacity 5.30 gal (20.1 L)
Reserve Fuel Capacity 0.80 gal. (3.0 L)

Weight:
• Dry Weight - 375 lbs. (168 kg)
• Gross Vehicle - 850 lbs. (386 kg), Weight Rating - Load Capacity 390 lbs. (177 kg)

The Engine
Engine Helicon™ liquid-cooled, 4-stroke, 72° V-Twin Valves Dual OHC, four valves per cylinder,
finger follower design and shimming
Bore x Stroke 4.055 in. x 2.658 in.
(103.00 mm x 67.50 mm)
Displacement 68.7 cu. in. (1125 cc)
Compression Ratio 12.3:1
Fuel Delivery Dual 61 mm down draft throttle bodies, DDFI III fuel injection
Intake Zero-resistance airbox, pressurized
RAM air intake
Exhaust Tuned, tri-pass resonance chamber with intergal helmholtz tuning and mass-centralized mounting

The Drivetrain
Primary Drive Helical Gear, 1.806:1 65/36 ratio
Final Drive3 Constant path, 14 mm pitch aramidreinforced Veyance Hibrex® belt with Flexten® Plus technology, 2.815:1 (76/27) ratio
Clutch Wet, multi-plate, Hydraulic Vacuum Assist (HVA) slipper – action clutch, hydraulic clutch lever effort
Transmission 6-speed, straight cut gears
Gear Ratios:
• 1st 2.462
• 2nd 1.750
• 3rd 1.381
• 4th 1.174
• 5th 1.042
• 6th 0.960

The Chassis4
Frame Aluminum frame, fuel in frame
Front Forks 47 mm Showa® inverted forks with adjustable compression damping,rebound damping and spring preload
Rear Shock Showa® coil-over monoshock with external piggyback reservoir and adjustable compression damping, rebound damping and spring preload

The Wheels:
• Front Phantom Metallic : 6-spoke, ZTL™ cast aluminum 3.5 in. x 17 in.
(88.9 mm x 431.8 mm)
• Rear 6-spoke, cast aluminum : 5.5 in. x 17 in.
(139.7 mm x 431.8 mm)

The Brakes
• Front : ZTL²™ brake, 8-piston, 4 pads, fixed caliper, 375 mm single-sided, insideout, stainless steel, floating rotor
• Rear :Two-piston, direct mount caliper; 240 mm, stainless steel, fixed rotor
Suspension Travel:
• Front Wheel 4.72 in. (120 mm)
• Rear Wheel 5.00 in. (127 mm)

The Electric
Battery (per Battery Council International Rating)
Sealed lead acid, maintenance-free, 12V, 12-amp/hour, 200 cca Charging 37-amp, permanent magnet, three-phase, solid-state regulator (500W @7000 rpm, 500W peak)
Starting 900W electric with one-way clutch

Lights:
• Headlamps Type (three-bulb headlamp system with daylight running mode, 55-watt [H7]) 55-watt low beam (one 55-watt bulb),   110-watt high beam (55-watt low beam with additional 55-watt bulb)
• Tail/Stop Lights 5W/21W
• Turn Signal Lights LED manual canceling
• License Plate Light 5W

0 comments:

Post a Comment

Motorcycle Desktop Wallpaper, New Motorcycle Specifications.